PRODUCTS>>>Metal Abrasives

Metal Abrasives

  • Stainless Steel Grit

    It's produced from draw benched cutting, grinding etc.. It is bright and no rust. Its shape can be round shot or cut wire shot, or column shot. It is widely used in surface treatment for Copper, Aluminium, Zinc, Stainless Steel. The workpiece will achieve the lusterless effect after blasting, and distinguish the metal is true color. It will not make rust on the workpiece. And the workpiece does not need acid washing to remove the rust. Its wear-resistance is 3-5 times of steel grits, and can reduce the prodution cost.

pelletHigh Chromium & Manganese Stainless Steel Grits: Round in shape

Main Chemical Composition: C≈0.15% Cr≈17% Mn≈2.0%

Hardness: 500HV（20HRC） Specification: 0.03mm~1.50mm

Tension Stress: 170Kgf/mm2

 

pellet304 Stainless Steel Grits: Round in shape, rust prevention, no magnetism for new material

Main Chemical Composition: C≈0.15% Cr≈17% Mn≈1.5% Ni≈7.0%

Hardness: 450HV（46HRC） Specification: 0.03mm~1.50mm

Tension Stress: 155Kgf/mm2

 

pelletStainless Steel Wire Gritss: Columned or rhombic in shape

Main Chemical Composition: C≈0.09% Cr≈13% Mn≈1.0%

Hardness: 430HV（44HRC）Specification: 0.20mm~1.50mm

Tension Stress: 140Kgf/mm2

 

 

  • Aluminium Grit

Bright appearance, column shape. It is applied in shot blasting surface treatment for Aluminum, Zinc or thin wall parts etc., it will bring obvious white effect to the workpiece.

pellet pelletAluminum Grits: Aluminium content Al≥99%

(can be customized 5056) columned or round in shape

Hardness: 71HV（15HRC） Specification: 0.60mm~3.00mm

Tension Stress: 25Kgf/mm2